Saan nanggagaling ang ingay ng injection molding machine?

Ang makina ng paghubog ng iniksyon ay isang mahalagang makina para sa paggawa ng mga plastik na hulma, na nagbibigay ng malaking kaginhawahan para sa paggamit ng mga plastik sa ating buhay. Sa panahon ng paggamit ng injection molding machine, madalas may mga ingay. Saan nagmula ang mga ingay na ito?

Generally, when the injection molding machine is used normally, there will be some noises. Angse noises can be used to judge that the operation of the machine is very normal, because some noises appear under normal conditions, and some noises are caused by faults. When the injection molding oil pump produces abnormal noise and vibration, it is usually possible from many aspects, for example, the installation of the oil pump motor is not concentric, the coupling of the oil pump is loose, the oil level is too low, etc., which will cause the oil pump to appear. cause of noise. At this time, the cause should be identified through inspection, and then a reasonable response can be taken to solve the problem. If the injection molding machine encounters a lot of noise from the motor during operation, it may be caused by damage to the motor bearing, so it is necessary to replace the connecting bearing. Ang noise of the injection molding machine may also have other sources, such as the total pressure valve, pipeline, hydraulic cylinder may be the source of the noise.

Kapag nakatagpo ng ingay mula sa injection molding machine, kinakailangang suriin at alamin ang pinagmulan ng ingay bago isagawa ang target na maintenance work.